SIAM CASTING POWDERS LTD.
SIAM CASTING POWDERS
SUPPLIES THE FINEST-QUALITY
INVESTMENT POWDERS AND
MATERIALS FOR THE LOCAL
CASTING INDUSTRIES
SCP - Products
INVESTMENT
POWDERS
POWDERS
Metacast
Loading...
Investment Powders
Siam Casting Powders
Metacast
SACK : 22.7 Kg
Drum : - 22.7 kg.
SCP is unrivalled in developing and improving our investment powders to meet the demands of the developing world of direct casting 3D printed resin or wax patterns.
Product Detail
Metacast
3D printing is fast moving in terms of technology, resin types and the print demands, SCP are committed to continually developing our investment powders to maintain the industry’s needs.
Metacast has been extensively tried & tested in some of the most renown factories throughout the world, to offer continued improvement on direct casting of 3D printed resin or wax models, from all types of resin and 3D printing manufacturers for castings far more superior than just optimal results.
TYPICAL PROPERTIES
| Powder / Water Ratio : | 100/38 |
| Working Time @ 25c Slurry Temp : | 8-9 min. |
| Gloss Off Time @ 25c Slurry Temp : | 12 – 14 min. |
| Thermal Expansion At 750c : | 1.2% |
MIX PROCEDURE
| Machine Vacuum Mixing | 38 : 100 |
| Hand Mix Then Vacuum | 38 : 100 |
| Use de-ionised water Weigh water and powder Slurry temperature 21 ํC Leave for 90 min to stand before burn out |
| MACHINE VACUUM MIXING | |
|---|---|
| 0 min | Weigh out water & powder Add powder to water |
| 1 min | Mix under vacuum |
| 0.5 min | Stop mixer and scrape blades |
| 3.5 min | Mix under vacuum |
| 2 min | Pour flasks |
| 1 min | Vacuum flasks |
| 8 min | Total time taken |
| HAND MIX THEN VACUUM | |
|---|---|
| 0 min | Weigh out water & powder Add powder to water |
| 1 min | Mix by hand |
| 3 min | Mix with machine |
| 1 min | Vacuum mixer bowl |
| 1 min | Pour flasks |
| 2 min | Vacuum flasks |
| 8 min | Total time taken |
