Alloys such as Platinum and stainless steel can be cast with melting temperature
up to 2100°C / 3800°F
Pro-HT is available to two formats Pro-HT Platinum and Pro-HT Steel. Each product
is specifically formulated to
achieve optimum casting results with the specific alloy
 |
For mixing and burnout instructions see Technical Information. |
| For applications such as stainless steel jewellery, watch parts, body piercings, model parts and rapid prototyping. |
 |
| Maximum recommended alloy temperature for use with Pro-HT Steel is 1700°C / 3090°F. |
| Pro-HT Steel is designed to produce castings with exceptional
dimensional accuracy and detail reproduction with high level of surface finish. |
| Pro-HT Steel is invested using the traditional rubber base and steel flask
system and can be burnt out using the Pro-HT burnout cycle 90 minutes
after investing. |
| Pro-HT Steel may be used to burn out waxes and SLA models, however
please notethat the surface finish achieved when casting SLA models may
be inferior to castings made from standard waxes. |
| Pro-HT Steel is vacuum packed in 10KG Aluminium Foil Laminate bags
with an easy zip lock to reseal the bag once opened. |
| This type of packaging has never been available to the investment
casting industry before and is exceptionally important as phosphate bonded
products are extremely sensitive to atmospheric moisture and exposure will
instantly degrade the products performance |
| For mixing and burnout instructions see Technical Information. |
|
| For casting Platinum, Platinum Alloys and Palladium jewellery and other applications. |
| Maximum recommended alloy temperature for use with Pro-HT Platinum is 2100°C / 3800°F. |
| Due to the extreme melting point of these alloys Pro-HT Platinum has a
higher refractory content than Pro-HT Steel and also uses a stronger
phosphate binder system to with stand the higher alloy temperatures. |
| Pro-HT Platinum is invested using the traditional rubber base and steel flask
system and can be burnt out using the Pro-HT burnout cycle 90 minutes
afterinvesting. |
| Pro-HT Platinum may be used to burn out waxes and SLA models, however
please note that the surface finish achieved when casting SLA models may
be inferior to castings made from standard waxes. |
| Pro-HT Platinum is vacuum packed in 10KG Aluminium Foil Laminate bags
with an easy zip lock to reseal the bag once opened. |
| This type of packaging has never been available to the investment casting
industry before and is exceptionally important as phosphate bonded products
are extremely sensitive to atmospheric moisture and exposure will instantly
degrade the products performance. |
