SIAM CASTING POWDERS LTD.
SIAM CASTING POWDERS
SUPPLIES THE FINEST-QUALITY
INVESTMENT POWDERS AND
MATERIALS FOR THE LOCAL
CASTING INDUSTRIES
SCP - Products
INVESTMENT
POWDERS
POWDERS
Synergy
Loading...
Investment Powders
Siam Casting Powders
Synergy
SACK : 22.7 Kg
Drum : - 22.7 kg.
A Premium Investment Powder for Resin/CAD casting, which has been
tested and approved worldwide
Product Detail
Synergy
Synergy was developed by G3D in the United Kingdom – tried and tested by jewellery manufacturers
worldwide. It is designed Primarily for investing, burnout and DIRECT
CASTING of your resin/wax patterns.
Highest Quality raw materials sourced and graded for Resin/CAD direct casting Formulated with a greater green strength enabling it to withstand the high Resin/CAD expansion Can be used with any Resin/CAD manufacturer Clean cut surface finish, sharp edges, without inclusions Easy removal after casting, like your regular GRS investment powders
TYPICAL PROPERTIES
| Powder / Water Ratio : | 100/38 |
| Working Time @ 25c Slurry Temp : | 8-9 min. |
| Gloss Off Time @ 25c Slurry Temp : | 12 – 14 min. |
| Thermal Expansion At 750c : | 1.2% |
MIX PROCEDURE
| Machine Vacuum Mixing | 38 : 100 |
| Hand Mix Then Vacuum | 38 : 100 |
| Use de-ionised water Weigh water and powder Slurry temperature 21 ํC Leave for 90 min to stand before burn out |
| MACHINE VACUUM MIXING | |
|---|---|
| 0 min | Weigh out water & powder Add powder to water |
| 1 min | Mix under vacuum |
| 0.5 min | Stop mixer and scrape blades |
| 3.5 min | Mix under vacuum |
| 2 min | Pour flasks |
| 1 min | Vacuum flasks |
| 8 min | Total time taken |
| HAND MIX THEN VACUUM | |
|---|---|
| 0 min | Weigh out water & powder Add powder to water |
| 1 min | Mix by hand |
| 3 min | Mix with machine |
| 1 min | Vacuum mixer bowl |
| 1 min | Pour flasks |
| 2 min | Vacuum flasks |
| 8 min | Total time taken |
